XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
4. Loosen brake fluid reservoir-cap.
-
Position a cloth around the reservoir to collect any fluid spillage.
5. Remove brake pads from caliper.
-
Withdraw pins from caliper.
-
Remove anti-rattle spring.
-
Discard brake pads.
6. Clean all mating surfaces and remove brake dust, see WARNING above.
7. Repeat above procedure to remove opposite side brake pads.
Installation
CAUTION: Make sure grease does not contact brake-pad friction surface or brake disc.
1. To prevent brake squeal apply grease to the shoulders of the brake-pad backplate.
-
Apply a uniform layer of grease to backplate shoulders, making sure the whole shoulder is covered.