XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
5. Remove caliper housing from caliper carrier.
-
Remove anti-rattle spring.
-
Remove dust covers.
-
Remove guide pins.
-
Remove housing from carrier.
-
Tie caliper housing aside.
CAUTION: Always install new brake pads, irrespective of the condition of the original pads, when renewing a brake disc.
NOTE: The inner brake pad is fitted with a clip which secures the pad into the caliper piston.
6. Remove brake pads from caliper housing.
-
Discard brake pads.