XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
-
Discard brake pads.
CAUTION: Only remove the bolts securing the caliper anchor bracket to the hub carrier. Refer to caution above for more information.
CAUTION: Do not allow the caliper to hang on the hydraulic hose, as this will damage the hose.
6. Remove caliper from hub carrier.
-
Remove bolts.
-
Remove and tie caliper aside.
7. Align brake disc access hole with parking brake adjuster.
-
Remove plug from access hole.
-
Rotate brake disc until access hole is aligned with adjuster.
8. Slacken parking brake adjuster to allow for the removal of the brake disc.
-
Rotate adjuster clockwise.