XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1543003.png)
9. Release brake tubes.
-
Undo union nuts and release inlet brake tubes.
-
Install plugs to inlet ports and brake tubes.
-
Undo union nuts and release outlet brake tubes.
-
Install plugs to outlet ports and brake tubes.
10. Remove brake control modulator from bracket.
-
Remove bolts.
11. Clean components and mating surfaces.
Installation
NOTE: The replacement brake control modulator is pre-filled with brake fluid.
