XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-418005.png)
4. Install the primary timing chain.
Install the primary chain to position over the crankshaft sprocket and the VVT unit sprocket. There must be no slack on the drive side of the
primary chain.
The VVT unit must not be rotated on the camshaft
5. Install the primary chain tensioner blade.
Position the tensioner blade to the cylinder block.
Install the retaining/Divot bolt and tighten it to 12 - 16 Nm.
6. Install the primary chain tensioner assembly.
Use a wedge 303-533 (or two if required) between the primary chain tensioner and tensioner blade, to take up the slack in the chain.
