XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Camshaft Gear/Sprocket: Service and Repair
Bank 2 - Exhaust Camshaft Sprocket
Exhaust Camshaft Sprocket 4.0L NA - Bank 2
Camshaft Setting Tool 303-530
Crankshaft Setting Peg 303-531/645
Timing chain tensioning tool 303-532
Special Service tools
Removal
1. Open the engine compartment and fit paintwork protection sheets.
2. Set the engine compartment cover to the service access position.
3. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
4. Disconnect the battery ground cable.
Remove the battery cover.
5. Remove the cam cover from Bank 2.
6. Raise the vehicle on a ramp.