XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Oil Pan: Service and Repair
Oil Pan Body Assembly
Oil Pan Body Assembly 4.0L NA 12.60.48
Removal
1. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
2. Disconnect the battery ground cable.
Remove the battery cover.
3. Open the engine compartment and fit paintwork protection sheets.
4. Set the engine compartment cover to the service access position.
5. Remove the timing cover and all associated components.
6. Remove both front wheel and tire assemblies.
7. Remove the undertray.
8. Remove the two bolts which secure the generator cooling duct to the oil pan body and remove the duct.
9. Remove the front cross member for access. Includes cruciform strut assembly on convertible.