XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-521005.png)
15. Reconnect the electrical connector to each fuel injector.
16. Reinstall the induction elbow support; working from the left hand side.
(1) Install the upper bolt to the induction elbow support bracket.
(2) Tighten the lower two bolts at the induction elbow support bracket.
(3) Connect the engine breather T-piece to the induction elbow.
(4) Connect the vacuum pipe to the front of the induction elbow.
17. Install the induction elbow support; working from the right hand side.
(1) Install the upper bolt to the induction elbow support bracket.
(2) Reconnect the vacuum pipe to the center of the induction elbow.
