XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
14. Disconnect the multi-plugs from the throttle body.
Disconnect the throttle body motor multi-plug.
Disconnect the two potentiometer multi-plugs, one each side of the throttle.
Disconnect the vacuum pipe elbow from the throttle actuator.
15. Disconnect the throttle inner cable.
Turn the throttle pulley to the fully open position.
Disconnect the throttle inner cable from the pulley.
16. Disconnect the throttle outer cable.
Remove the throttle cable adjusting nut from the outer cable.
Remove the cable from the adjustment bracket.