XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-530005.png)
17. Disconnect the coolant hoses from the throttle body.
Release the clip which secures the coolant return hose and disconnect the hose. Install a blanking plug to the hose to prevent water leakage.
Release the clip which secures the coolant feed hose and disconnect the hose. Install a blanking plug to the hose to prevent water leakage.
18. Disconnect the multi-plug, located on the bracket under the left side of the throttle body.
19. Remove the throttle body securing bolts.
