XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-532006.png)
1. Install new seals to the timing cover.
Install and fully locate, a new seal to the inner groove on the face of the timing cover.
Install and fully locate, a new seal to the outer groove on the face of the timing cover.
2. Apply sealant to the eight joints on the engine face.
Sealant beads to be 3 mm diameter and 12 mm long. Cut the nozzle of the sealant tube to produce a 3 mm bead. (Install and tighten the securing
bolts within twenty minutes of sealant application).
3. Install the timing cover, step 1.
Lower the cover into the engine compartment, to its approximate position.
