XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
12. Install the intake tube/air flow meter/air cleaner cover assembly.
Install a new rubber seal; air intake tube to throttle body.
Install the intake tube/air flow meter/air cleaner cover assembly.
13. Reconnect the air cleaner cover.
Install the five clips which secure the air cleaner cover.
14. Connect the intake tube to the throttle body.
Connect the intake tube to the throttle body.
Install the two bolts which secure the intake tube to the throttle body. Tighten to 4 - 5 Nm.
15. Reconnect the air flow meter multi-plug.
16. Install the engine covers.
17. Install the crankshaft damper.
18. Install the idler pulley, to the Front Accessory Drive.
19. Install the belt tensioner assembly, to the Front Accessory Drive.