XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
14. Install the VVT bush carrier to the cylinder block.
Lubricate the seal (scarf jointed) and the bush.
Install the bush carrier assembly.
Check that the seals are in place and that the ring dowels are engaged squarely. Fully locate the assembly as much as possible by hand pressure.
Install the three securing bolts. Tighten to 19 - 23 Nm.
15. Install the Timing Cover.
16. Move the engine compartment cover from the service position and connect the gas struts.
17. Remove the paint protection sheets and close the cover.
18. Connect the battery and install the battery cover.
Bank 2
Timing Chain (Primary) - Bank 2 12.65.67
Camshaft Setting Tool 303-530
Timing chain tensioning tool 303-532
Wedges, primary chain 303-533