Jaguar Workshop Service and Repair Manuals > XK-8 Convertible (X100) V8-4.0L (AJ26) (1997) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain | Component Information | Service and Repair | Timing Chain (Primary)

Timing Chain Guide > < Timing Chain (Primary)|Page 2362

Page 14

12. Install the crankshaft position sensor.

Install the sensor to the flywheel housing and install the securing bolt. Tighten to 8 - 12 Nm.
Install the access grommet to the housing.

13. Lower the ramp.
14. Install Bank 2 VVT Bush Carrier Assembly.
15. Install the Timing Cover.
16. Move the engine compartment cover from the service position and connect the gas struts.
17. Remove the paint protection sheets and close the cover.
18. Connect the battery and install the battery cover.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Component Information
Service and Repair / Timing Chain (Primary)
Page 2363

Timing Chain Guide > < Timing Chain (Primary)|Page 2362

Jaguar Workshop Service and Repair Manuals

XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Component Information Service and Repair / Timing Chain (Primary) Page 2363

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Component Information Service and Repair / Timing Chain (Primary) Page 2363

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Component Information
Service and Repair / Timing Chain (Primary)
Page 2363

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Component Information
Service and Repair / Timing Chain (Primary)
Page 2363