XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Fuse Block: Service and Repair
Fascia End Fuse-Box
Left
Removal
1. Open the driver's door, or both doors if necessary, to allow the side windows to drop. Ensure that the doors remain open until after the battery has
been disconnected.
2. Disconnect the battery ground cable.
Remove the battery cover.
3. Remove the cover from the fuse-box.
4. Remove the glovebox assembly, for access to the connectors. Refer to 'Body and Frame, Interior Trim, Glove Compartment.'
5. From behind the fuse-box (in the glovebox area) disconnect the harness multi-plug.