XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-938001.png)
Camshaft Position Sensor: Service and Repair
Removal
1. Disconnect battery ground cable. See: Starting and Charging/Battery/Battery Cable/Negative/Service and Repair
2. Remove engine covers.
3. De-pressurize fuel system. See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure Release
WARNING: BEFORE PROCEEDING, IT IS ESSENTIAL THAT ALL FUEL SYSTEM SAFETY PRECAUTIONS ARE READ AND
UNDERSTOOD. See: Fuel Delivery and Air Induction/Service Precautions
4. Remove coolant expansion tank fixings and reposition tank for access.
5. Remove bolts securing fuel feed pipe to inlet manifold.
