jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Variable Valve Timing Unit|Page 4274 > < Variable Valve Timing Unit|Page 4272
Page 1
background image

Variable Valve Timing Actuator: Service and Repair
Variable Valve Timing Bush Carrier

Bank 1

Variable Valve Timing (VVT) Bush Carrier - Bank 1 12.65.51 

Removal 

1. Open the engine compartment and fit paintwork protection sheets.
2. Set the engine compartment cover to the service access position.
3. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been

disconnected.

4. Disconnect the battery ground cable.

Remove the battery cover.

5. Remove the Timing Cover.

6. Remove the VVT bush carrier.

Remove the three bolts which secure the carrier to the cylinder block.
Release the carrier from the two ring dowels and remove it.

Variable Valve Timing Unit|Page 4274 > < Variable Valve Timing Unit|Page 4272