XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Variable Valve Timing Solenoid: Service and Repair
VVT Solenoid 18.30.90
Removal
1. Open the engine compartment and fit paintwork protection sheets.
2. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
3. Disconnect the battery ground cable.
Remove the battery cover.
4. Disconnect the VVT solenoid connector.
5. Remove the two bolts which secure the VVT to the timing cover.