XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-996004.png)
13.
Install new sealing rings (Illustration 5) on the securing bolts and then install the bolts in the camshaft cover.
14.
Apply a bead of approved RTV sealant to the two areas where the joint between the front cover and the cylinder head is exposed (Illustration 6).
NOTE:
Install the camshaft cover immediately after applying the sealant. Position the cover with the retaining bolts to avoid smearing the sealant bead.
