XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
14.
Reconnect the hose of the carbon canister to the valve.
15.
Reconnect the vent hose of the fuel tank to the valve. Install a new tie strap.
16.
Reconnect the vacuum hose.
17.
Reinstall the wheel well fender liner.
18.
Reinstall the left front wheel and lower the vehicle.
NOTE:
In cases where the tank pressure control valve has been verified as working properly, proceed with basic mechanical checks followed by PDU
diagnosis.
Parts Information:
Warranty Information: