XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1099005.png)
5. Reposition outer cable to abutment bracket.
Install but do not tighten adjusting nut.
6. CAUTION: Under no circumstances should quadrant be held clear of throttle stop by cable tension.
NOTE: Make sure there is neither tension nor slack in the cable.
Install throttle cable.
Tighten locknut without altering setting or introducing twist into the cable outer.
7. Connect connectors and vacuum pipe.
8. Where appropriate check kickdown setting is within specification and reset if required.
