XK-8 Convertible (X100) V8-40L (AJ26) Throttle Cable/Linkage TSB
3. Condition the cable
Operate the throttle pedal through FULL travel for a minimum of 20 (twenty) cycles
4. Recheck the quadrant/stop relationship to ensure contact without slack or tension
CAUTION: Under no circumstances may the quadrant be held clear of the throttle stop by cable tension
Adjust the locknuts to suit
5. Check the kickdown setting to ensure that it is within specification & reset if required as detailed from step #6.
6. Connect scantool
Read 'Current Powertrain Data'