XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Air Bag Control Module: Service and Repair
WARNING: BEFORE ANY AIRBAG/SRS SERVICE IS PERFORMED, PLEASE REVIEW SERVICE PRECAUTIONS. See: Restraint
Systems/Air Bag Systems/Service Precautions
Removal
1. Turn ignition key to position II, power passenger's seat fully rearwards and turn ignition key to position 0.
2. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
WARNING: BEFORE ANY AIRBAG/SRS SERVICE IS PERFORMED, AT LEAST ONE MINUTE MUST ELAPSE AFTER
DISCONNECTION OF THE BATTERY POSITIVE CABLE, TO ALLOW DISSIPATION OF BACK-UP POWER SUPPLY ENERGY.
3. Remove glove box. See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
4. Remove body processor module. See: Relays and Modules - Powertrain Management/Relays and Modules - Computers and Control
Systems/Body Processor Module/Service and Repair
5. Remove footwell lamp and mounting bracket.
1. Slacken and remove screw securing footwell lamp mounting bracket to the air conditioning duct.
2. Disconnect footwell lamp multiplug.
3. Remove footwell lamp and bracket.
6. Detach fascia harness fasteners from fascia RH end panel and reposition harness for access.