XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Eyelet Designation
Grounds
HARNESS CODE + GROUND STUD NUMBER + EYELET STUD POSITION (A,B,C) + EYELET DESIGNATION (S,L,R)
Eyelet Stud Position
There may be up to three eyelets on one stud. A, B and C are used to indicate the position of the eyelet on the stud: A - first (bottom), B -
second (middle), C - third (top).
Eyelet Designation
Two eyelet variations are used: a single eyelet and an eye et pair. The single eyelet has a single 'leg', which is identified by an S; the eyelet pair
has two 'legs', identified as L (eft) or R (right).
Key to Wiring Diagrams