XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
-
Measure the resistance between the ECM connector EM010/020 & the ECT connector P1004/001
-
Is the resistance < 0.5 Ohms?
-> Yes
GO to [A7]
-> No
Repair the harness/connector (P1001/006) or splice EMS02
Reconnect P1042 & P1006 (electronic throttle body), P1035 (MAP meter), EM010, EM011 & ETC connector & test the system for normal
operation
A7: END
Perform appropriate service drive cycle & check for the presence of DTC
-
Has the fault code cleared?
-> Yes
STOP
-> No
Contact Jaguar Service
Pinpoint Test B
Pinpoint test B: P0117
B1: RETRIEVE DTCS
NOTE: Battery and/or ECM disconnection prior to scanning will erase all data, ensure that the correct DTC is Present