XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Generator: Service and Repair
Installation
Installation
1. Fit the generator to the engine.
1
From above, position the generator and fit the upper mounting bolt and nut, but do not fully tighten.
2. Fit the generator lower mounting.
1
From below, reposition and align the harness mounting bracket to the generator lower mounting.
2
Fit the lower mounting bolt and nut.
3. Connect the harness.
1
Reposition the suppression module harness and connect the negative cable to the generator negative terminal. Fit and tighten the terminal nut.
2
Connect the suppression module positive cable to the generator positive terminal. Connect the main positive cable to the generator terminal. Fit
and tighten the terminal nut.
3
Reposition and fit the boot to the terminal.
4
Reconnect the generator harness multi-plug.
4. Lower the vehicle on the ramp.
5. Fully tighten the generator upper mounting bolt.