XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Starter Motor: Service and Repair
Removal
1. Open the driver's door, or both doors if necessary, to allow the side windows to drop. Ensure that the doors remain open until after the battery has
been disconnected.
2. Open the engine compartment and fit paintwork protection sheets.
3. Disconnect the battery ground cable.
Remove the battery cover.
4. Place the vehicle on a ramp.
5. Working from below the vehicle, remove the power steering rack for access.
6. Disconnect the starter motor main terminal.
Reposition the rubber boot from the main terminal.
Remove the nut from the starter motor main terminal.
Disconnect the main cable from the terminal.