XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1604003.png)
1. Installation is the reverse of the removal procedure. Tighten the starter motor securing bolts to 38-48 Nm.
2. Refit the steering rack . Refill the reservoir with the recommended fluid and bleed the steering system.
3. Lower the ramp. Remove the protection sheets and close the engine compartment cover.
4. Connect the battery and fit the battery cover.
Refer to the Battery Reconnection Procedure in 'Starting and Charging, Battery, Service and Repair.'
