XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1693005.png)
5. Connect inlet hose to pump.
Remove blanking plugs from hose and pump.
Connect hose to pump.
Secure hose with clip.
6. Fit drive pulley to pump.
Fit, but do not tighten bolts.
7. Fit front end accessory drive belt.
8. Tighten pulley bolts.
9. Clean any spilt fluid from around pump area.
10. Remove drain pan.
11. Fit a new power steering oil reservoir (combined reservoir and oil filter assembly) and bleed air from system.
12. Connect battery ground cable.
13. Remove paintwork protection covers.
