XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
4. Fit tie-rod end to steering arm.
1. Position tie-rod end, taper-pin into steering arm.
2. Fit and tighten nut.
5. Fit wheel speed-sensor to vertical link.
1. Align speed sensor.
2. Fit and tighten bolt.
6. Fit brake disc.
Refer to Brakes and Traction Control - Disc Brake System - Brake Rotor/Disc - Service and Repair - Procedures See: Brakes and Traction
Control/Disc Brake System/Brake Rotor/Disc/Service and Repair
7. Fit wheel.
8. Remove stands and lower vehicle.
9. Remove paintwork protection covers.