XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1282001.png)
Overdrive Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground lead
2. Carry out the following procedures.
-
Selector lever knob, Renew.
-
Console finisher veneer panel, Renew.
-
'J Gate' surround, Remove for access
-
Selector indicator module, Renew.
3. Remove the D to 4 switch.
-
Press the retaining tangs to release.
INSTALLATION
1. Fitting a new D to 4 switch is the reverse of the removal procedure.
