XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
Transmission Speed Sensor: Service and Repair
Output Shaft Sensor Replacement
REMOVAL
NOTE: For INPUT see step #4, for OUTPUT refer to step #6; the procedures differ only in location within the transmission assembly.
1. Disconnect the battery ground lead..
WARNING: TRANSMISSION FLUID MAY CAUSE SEVERE BURNS, ENSURE THAT ALL SAFETY PROCEDURES ARE
OBSERVED.
2. Raise the vehicle on a suitable lift.
-
Carefully remove the drain plug and drain the transmission fluid.
3. Remove fluid pan fixings (22)
-
Remove the fluid pan and all traces of gasket material.
NOTE: M5 fixing
4. Release the fixing (1 ) INPUT speed sensor securing bracket and pull the sensor clear.
OR