XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-1350003.png)
9. Disconnect pressure regulator (5) and solenoid (3) connectors.
10. Release the internal harness from the retaining clips and remove the harness.
INSTALLATION
1. Fitting a new internal harness is the reverse of the removal procedure noting the following.
2. Lubricate EM046 'O' rings with transmission fluid prior to fitting.
3. Tighten selector cable abutment fixings (2).
NOTE: M5 fixing
