XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-2283005.png)
25. Exercising care not to damage paintwork, use vibroknife to remove residual sealant from body flange.
26. Remove protective cloth from fascia.
27. Remove protective tape from windshield aperture flange.
Installation
1.
If original windshield is to be refitted:
Remove residual sealant from glass mating surface using a suitable scraper.
Check installation of the two spacer buttons at bottom of glass and replace if they are damaged or missing.
