XK-8 Convertible (X100) V8-4.0L (AJ26) (1997)
/v8-4.0l_(aj26)/Page-2297001.png)
Windshield Washer Switch: Description and Operation
The right hand column switch controls the following functions with the ignition in position
Position '0'. Wipers Off.
With the wipers 'Off' position selected:
The windscreen wipers are stationary and in the parked position.
Position 'I'. Intermittent Wipe.
With intermittent wipe selected:
The collar can be rotated to vary the delay between wipes.
Turn the collar counter-clockwise to increase the time delay.
Six collar positions are available and will vary the delay from two seconds to twenty seconds.
Position 'II'. Normal Wiper Operation.
With normal wiper operation position selected:
The wipers operate continuously at normal speed.
Position 'III'. High Speed Wiper Operation.
With the high speed wiper position selected:
The wipers will operate continuously at maximum speed.
Flick Wipe.
To obtain a flick wipe:
Pull the switch stalk towards the steering wheel for a single slow speed wipe.
With the switch held in this position, the wiper will operate continuously at slow speed until released.
Programmed Wash/Wipe.
To obtain the wash/wipe program:
Press the button on the end of the switch stalk.
