XK-8 Convertible (X100) V8-4.0L (AJ27) (2001)
-
Tighten the muffler to downpipe catalytic converter securing clamps (left- and right-hand sides).
3. Install the front grass shields (Japanese market only).
-
Install the grass shield securing bolts.
4. NOTE: If necessary, rotate the intermediate muffler at the front to intermediate muffler joint to achieve the tailpipe trim settings.
Correctly position the rear muffler/tailpipe assembly.
-
Connect the rear muffler to the intermediate muffler and insert to the Nominal indicator ring, rotating back and forth to aid engagement.
-
Engage the peg with the mounting rubber.
-
Check that the tailpipe position is within the specified settings, adjusting engagement within the Maximum and Minimum indicator rings if
necessary.
5. Tighten the intermediate to rear muffler securing clamp.