XK-8 Convertible (X100) V8-4.0L (AJ27) (2001)
Parking Light Bulb: Service and Repair
Removal
1. Open the engine compartment cover.
2. Remove the access cap from the closing panel.
-Squeeze the lower two clips to release the cap.
3. Remove the bulb from the vehicle (working through the access cap aperture).
1. Rotate the bulb holder (quarter-turn) and harness plug to remove the assembly from the lamp.
-
Pull the bulb from the bulb holder assembly.
Installation
1. Installation is the reverse of removal.
-
Check that the seal is in place before fitting the access cap to the closing panel.