XK-8 Convertible (X100) V8-4.0L (AJ27) (2001)
/v8-4.0l_(aj27)/Page-1117001.png)
Window Seal: Service and Repair
Door Inner Waist Seal
Removal
1. Remove door casing for access.
2. Commencing at door release button recess, carefully use a thin blade to ease inner waist seal from rear of door waist flange.
3. Working from rear, and exercising care to avoid distortion, progressively remove seal from waist flange.
Installation
1. Ensure that top edge of PVC water shedder is correctly positioned on door waist flange.
2. Commencing at front and ensuring that end of seal aligns with front of door waist flange, fit and fully seat seal on door.
