XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Carpet: Service and Repair
Driver Side
Removal
1. Remove battery cover and disconnect ground cable from battery terminal. Refer to 'Battery, Battery Cable.' See: Starting and
Charging/Battery/Battery Cable/Negative
2. Remove door sill treadplate. See: Scuff Plate/Service and Repair
3. Remove driver seat. See: Seats/Service and Repair
4. Remove 'J' gate surround. See: Console/Service and Repair
5. Remove center console for access. See: Console/Service and Repair
6. Remove rear quarter casing for access. See: Trim Panel/Service and Repair
7. Remove rear seat cushion. See: Seats/Seat Cushion/Squab/Service and Repair
8. Remove 'A' post lower trim pad. See: Trim Panel/Service and Repair
9. Exercising care, use a thin blade to release footrest tangs and spigots from mounting plate.
10. Remove footrest mounting plate securing bolts and remove mounting from vehicle.