XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-2043001.png)
Power Mirror Motor: Service and Repair
Removal
1. Remove exterior mirror glass. See: Service and Repair
2. Remove movement motor pack from housing.
Slacken and remove the three self tapping screws securing motor pack to housing.
Partially withdraw motor pack, disconnect multiplug and remove motor pack from mirror housing.
Installation
1. Fit glass movement motor pack to housing.
Connect multiplug and position motor pack in housing ensuring that harness is correctly routed and not trapped.
Fit and tighten the three self tapping screws securing motor pack to housing and fold-back mounting.
2. Fit exterior mirror glass. See: Service and Repair
