XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
8. Disconnect switchpack harness multiplug.
9. Positioning cushion foam for access, use a screwdriver to release switch pack securing tab.
Installation
1. Fit and fully seat switchpack in seat.
2. Positioning cushion foam for access, connect harness multiplug to switchpack.
3. Position slide assembly on seat frame and install securing bolts.
4. Connect seat harness multiplugs.
5. Install harness multiplug onto mounting bracket.
6. Using new tiestraps, secure harness to seat frame and motor.
7. Install seat assembly in vehicle.
8. Connect ground cable to battery terminal and fit battery cover. Refer to Battery Reconnection Procedure. See: Starting and
Charging/Battery/Service and Repair