XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
1. Install brake control modulator to bracket.
-
Install bolts and tighten to 8 - 10 Nm.
NOTE: To minimize brake fluid loss, install the brake tubes in the order shown.
2. Install brake tubes.
-
Remove plugs from outlet ports and brake tubes.
-
Install and tighten outlet brake-tube union nuts. Refer to Electronic Brake Control Module, Specifications for torque setting.
-
Remove plugs from inlet ports and brake tubes.
-
Install and tighten inlet brake-tube union nuts.