XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Parking Brake Cable: Service and Repair
Cable - Front
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict
the number of times a nut or bolt can be used.
1. Position vehicle on a four-post lift.
2. Remove driver's seat.
3. Remove parking-brake lever trim.
4. Remove the lower slider bar of the driver side seat belt.
-
Remove bolt.
-
Remove slider bar from body grommet and seat belt loop.
-
Collect spacer and card washer.
5. Raise rear seat cushion on driver's side of vehicle for access to carpet.
-
Remove nuts securing seat cushion to body.
-
Raise seat cushion.
6. Reposition carpet to gain access to parking brake cable.
7. Raise vehicle.