XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Vacuum Brake Booster: Service and Repair
Brake Booster and Master Cylinder Assembly
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict
the number of times a nut or bolt can be used.
CAUTION: Remove brake fluid spillage immediately from paint work, with clean water.
1. Position vehicle on a four-post lift.
2. Open engine compartment and fit paint work protection covers to fenders.
3. Disconnect battery ground cable.
4. Remove windshield wiper arm and blade assembly for access.
5. Remove plenum cover for access.
6. Remove pedal housing, brake booster and master cylinder assembly.
7. Remove reservoir filler cap and pour residual brake fluid into a container. Refit cap.
8. Remove stoplamp switch from pedal housing.
-
Remove nuts.
9. Release brake pedal from brake booster push-rod.
-
Remove clip from clevis pin.
-
Remove clevis pin,