XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-511004.png)
15. Disconnect the throttle inner cable.
Turn the throttle pulley to the fully open position.
Disconnect the throttle inner cable from the pulley.
16. Disconnect the throttle outer cable.
Remove the throttle cable adjusting nut from the outer cable.
Remove the cable from the adjustment bracket.
17. Disconnect the coolant hoses from the throttle body.
Release the clip which secures the coolant return hose and disconnect the hose. Install a blanking plug to the hose to prevent water leakage.
Release the clip which secures the coolant feed hose and disconnect the hose. Install a blanking plug to the hose to prevent water leakage.
