XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-511012.png)
13. CAUTION: Under no circumstances may the quadrant be held clear of the throttle stop by cable tension.
Install the throttle cable and ensure that there is neither tension nor slack in the cable.
Tighten the locknut without altering the setting or introducing twist into the cable outer.
Check the kickdown setting using the PDU. For scan tool procedure, refer to Throttle Cable Renew (Adjust).
14. Reconnect the multi-plugs to the throttle body.
Connect the throttle body motor multi-plug.
Connect the two potentiometer multi-plugs, one each side of the throttle.
Connect the vacuum pipe elbow to the throttle actuator.
15. Install the intake tube/air flow meter/air cleaner cover assembly.
Install a new rubber seal; air intake tube to throttle body.
Install the intake tube/air flow meter/air cleaner cover assembly.