XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Timing Cover Gasket: Service and Repair
Removal
1. Open the engine compartment and fit paintwork protection sheets.
2. Set the engine compartment cover to the service access position.
3. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
4. Disconnect the battery ground cable.
Remove the battery cover.
5. Drain the coolant from the radiator.
6. Disconnect the radiator top hose.
Slacken the hose retaining clip and reposition the clip along the hose.
Disconnect the hose from the radiator.
7. Disconnect the top hose from the coolant outlet pipe.
Release and reposition the hose clip, and disconnect the top hose.