XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Headlamp Bulb: Service and Repair
Bulb - Main Beam
Removal
1. Open the engine compartment cover.
2. Remove the access cap from the closing panel.
Squeeze the lower two clips to release the cap.
3. CAUTION: The bulb will be damaged if touched by bare hands or contaminated with oil or grease. It is important to use clean gloves or
cloth when handling a bulb. A contaminated bulb may be cleaned with methylated spirit before fitting.
Remove the main beam bulb / bulb holder assembly from the vehicle (working through the access cap aperture).
Rotate the bulb holder anti-clockwise by approximately a quarter-turn to release it from the lamp.