XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Turn Signal Bulb: Service and Repair
Front Direction Indicator
Removal
1. Open the engine compartment cover.
2. Remove the access cap from the closing panel.
-
Squeeze the lower two clips to release the cap.
3. Remove the direction indicator bulb from the vehicle (working through access cap aperture).
(1) Rotate the bulb holder (quarter-turn) and harness plug to remove the assembly from the lamp.
-
Remove the bulb from the bulb holder assembly.
Installation
1. Installation is the reverse of removal.
-
Check that the seal is in place before fitting the access cap to the closing panel.