XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
-
Release brake pedal.
-
Wait two seconds to allow system to prime.
-
Repeat procedure until air-free brake fluid is expelled from the caliper.
6. Tighten bleed nipple to:
-
Front caliper bleed nipple: 4 - 6 Nm.
-
Rear caliper bleed nipple: 8 - 11 Nm.
7. Following the procedure above, bleed the brakes in the order shown:
-
Left-Hand Front,
-
Right-Hand Front,
-
Left- Hand Rear,
-
Right-Hand Rear.
CAUTION: Remove brake fluid spillage immediately from paint work with clean water.